CONSTRUCTION OF THE MACHINE
These are fabricated from M. S. rolled section confirming
no jerks will come during Rolls operation. The frame is
machined accurately for fitment of housings.
These are fabricated from M.S. plates which are welded
as Box type frames with grey Cast Iron or Phosphorous
Bronze Bearings in the main journals for the rolls.
The Rolls are forged Alloy Steels machined .
Two bottom rolls are fitted in movable in fixed beaings,
the top roll will be movable screw down arrangements
called PYRAMID TYPE MACHINE.
Two bottom rolls movable in the bearings and also
move up and down by screws & nuts called INITIAL PINCH
and PINCH PYRAMID Type Machines.TOP ROLL rotates in
the Fixed Centre. A Shell is formed around the Top Roll.
The Swinging of Drop-End Bearing of the top roll permits
quick and easily removal of rolled Pipe, while the roll itself
remains in horizontal position.
BOTTOM BENDING ROLL
The two bottom rolls are arranged symmetrically.
They adjusted diagonally up and down with electric
motors coupled with specially designed gear boxes.
The movements of the both rolls is dependent of each other.
These Rolls can be inclined with respect of top roll
during Conical Rolling.
The bottom rolls are adjusted mechanically by gear boxes
and screw termed as bending Gear Box or also adjusted
Hydraulically if required. The housings are fitted with
Alloy Steel worm and phosphorous Bronze worm wheels,
mounted in tapered Roller Bearings for smooth operation
Gear Box.The position of bottom rolls with respect to the
top roll determines the curvature of the Shell or Pipe
to be rolled.
THE MAIN DRIVE
The main drive to the rolls are obtained from a high
powered motor through Reduction Gear Box, pinion and Gear.
All the Gears and Shafts are driven in Ball/Roller Bearings.
The main motor is reversible type, which facilitates
pre bending as well as rolling in both directions for
Initial Pinch/Pinch Pyramid type machines and directly
driven the main machine through main only & bottom
rolls are movable in Fixed Bearings called
Pyramid type Machines.
PIPE AND ALL SECTION BENDING MACHINES
Our Pipe Bending Machine can achieve Bending Effects on
various metal pipes and sections with high quality,
little deformation and pleasant surface appearance.
It is widely used in Industries such as Construction,
Installation and Decoration, Metal Furniture, Hardware
and Light Industry.
Section Bending Machine can achieve Bending effects
on various profiles such as Round ducts, round bars,
angle iron, U-bars, and T-bars through the change of rollers.
These machines are used in industries such as construction,
hardware,light industry and chemical industries.
Pipe and Section Machines are pyramid, Initial Pinch
and Pinch Pyramid type and also Hand operated, motorized
and Hydraulic operated.
PIPE AND ALL SECTION BENDING MACHINES HYDRAULIC PIPE BENDER WITH HINGED FRAME
Manual Operated for Long Radius Heavy Gauge Bending
3/8" to 6" Gas,Water Steam and Heavy Gauge Galvanized
Water Pipe up to 90 Degree.
HYDRAULIC MOTORISED PIPE BENDER WITH HINGED FRAME
Motorized operated for long radius heavy gauge
bending 3/8" to 6" gas,water steam and heavy gauge
galvanized water pipe up to 90 degree.
HYDRAULIC MOTORIZED PIPE BENDER WITH HINGED FRAME WITH POWER PACK
Motorized with Power Pack Operated for Long Radius
Heavy Gauge Bending 3/8" to 6" gas,
Water Steam and Heavy Gauge Galvanized
Water Pipe up to 90 Degree
SPARE BENDING FORMERS OF HINGED FRAME
For Long Radius Heavy Gauge Bending 3/8" to 6" gas,
Water Steam and Heavy Gauge Galvanized
ater Pipe upto 90 Degree
HYDRAULIC PIPE BENDER WITH OPEN FRAME
Manual Operated for Long Radius Thin Wall Thickness
Bending 3/8" to 2" gas,Water Steam and Stainless Steel
Pipe up to 90 Degree
HYDRAULIC MOTORISED PIPE BENDER WITH OPEN FRAME
Motorized Operated for Long Radius Thin Wall
Thickness Bending 3/8" to 2" gas,
Water Steam and Stainless Steel Pipe up to 90 Degree
SPARE BENDING FORMERS OF OPEN FRAME
For Long Radius Thin wall Thickness
Bending 3/8" to 2" Water Pipe &
Stainless Steel Pipe up to 90 Degree
HYDRAULIC BAR AND STRIP BENDER
Manual Operated for Mild Steel, Copper, Brass and
Aluminum Bar and Strip Bending
HYDRAULIC MOTORISED BAR AND STRIP BENDER
Motorised operated for Mild Steel, Copper, Brass and
Aluminum Bar and Strip Bending.
HAND PIPE BENDER
Manual Operated for Long Radius Conduit and
Furniture Pipe Bending 180 Degree
SPECIAL PURPOSE HYDRAULIC PIPE BENDER WITH MANDREL SYSTEM
Motorized with Mandrel System is used to
Bend Thin Wall Thickness Short Radius Bending
Size up to 65 mm O.D. Furniture, Exhaust Silencers,
Automobile Industries, Door Handles,
Decorative Items of Stainless Steel Pipe, Square,
Rectangular and Solid Bar etc.